Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Download the HTAC installation package by saving the following attachment to your PC:     HTAC_INSTALL.zip  
  2. Unzip the installation package to a directory on your desktop.
  3. Transfer the unzipped files to the host using FTP as follows:

...

  1. From the TSO option 6 panel, issue the following command:  TSO RECEIVE INDSNAME('HTAC.XMITJCL') and press the Enter key.
  2. When prompted for restore options, enter DSNAME('HTAC.V100V13.JCL') and press the Enter key - the PDS will be created.
  3. From the TSO option 6 panel, issue the following command:  TSO RECEIVE INDSNAME('HTAC.XMITLOAD') and press the Enter key.
  4. When prompted for restore options, enter DSNAME('HTAC.V100V13.LIBRARY') and press the Enter key - the library will be created.
  5. From the TSO option 6 panel, issue the following command:  TSO RECEIVE INDSNAME('HTAC.XMITPARM') and press the Enter key.
  6. When prompted for restore options, enter DSNAME('HTAC.V100V13.PARMLIB') and press the Enter key - the PDS will be created.

...

Perform RDO Updates For Your Target CICS

  1. Edit the job HTAC.V100V13.JCL(RDOHTAC), changing the JOB card and RDO definitions to conform to your installation standards (see the comments in the DFHCSDUP control cards).
  2. Submit the job; a return code of zero indicates a successful execution.  If you receive a return code of other than zero, contact our support center.

...

  1. Obtain a license key from HostBridge Technology; it will be supplied to you via email.
  2. Create a member in HTAC.V100V13.PARMLIB named HBR@LICN and insert the license key into it (there should be only one line in the member which contains the license key, starting in column 1).
  3. Save the member.

...

Update Your Target CICS Startup JCL and System Initialization Table (SIT) and Recycle CICS

  1. In your CICS startup deck, include the library HTAC.

    V100

    V13.LIBRARY in your DFHRPL concatenation.  

    Note

    If you already have HostBridge installed, the library should be included after the existing reference to the HostBridge library in the DFHRPL concatenation.

  2. In your CICS startup deck, include a DD statement as follows: //HBPARMS  DD   DSN=HTAC.V100V13.PARMLIB,DISP=SHR; this PARMLIB will provide HTAC with access to your license key and initiallization member.. 
  3. In your CICS startup deck, include a DD statement as follows: //HBSTART  DD  SYSOUT=*; this will allow for the display of HTAC trace entries if required.
  4. In your SIT, ensure that you are running CICS monitoring.  Sample entries are: 
    • MCT=xx (where xx is the suffix for the assembled monitoring control table)
    • MN=ON
    • MNCONV=YES
    • MNEXC=ON
    • MNPER=ON
    • MNRES=ON.
  5. In your SIT, ensure that you are pointing to a PLT initialization module that contains a reference to module HBOPINIT (PLTPI=xx)..  
  6. Recycle your target CICS.

...